Crowdbeamer Configurator (admin interface) is not accessible when crowdbeamer device is attached to UTP network
This may be caused by a collision in the wireless and Ethernet IP ranges.
By default, a crowdbeamer device uses the range 192.168.0.1-192.168.3.254 for the wireless network, which includes 192.168.1.x (which is sometimes used on LAN configurations). If you move the wireless network to another IP range, the problem will most probably be solved.
How secure is crowdbeamer ?
Absolutely. Content is shared in real time through your source device’s VGA or HDMI port using crowdbeamer’s private Wi-Fi network. Your audience therefor never needs to access any corporate network. Additionally, you can - set a fixed password via ...
Is it possible to customize the crowdbeamer device to communicate my brand?
Yes, any crowdbeamer device can easily be customized to achieve just that. Customization examples include · setting a custom name (SSID) for your device, · changing its standby image to include your corporate logo, · changing its ...
Can I use crowdbeamer and Clickshare together ?
Yes. Both crowdbeamer and Clickshare serve a different purpose, and they do work together. There are two ways to get there, depending on whether the Barco Clickshare installation is accessible, and if you want to add crowdbeamer permanently to the ...
How can I activate my crowdbeamer?
If you're having trouble activating your crowdbeamer device, it might be interesting to watch our video on the activation process. You can use the following link to get there. (https://www.youtube.com/watch?v=-vOZ3cuHbss) To activate your ...
If I remove the battery, can crowdbeamer still run ?
Yes. If you have a fixed installation, and want to use crowdbeamer without the battery, you could remove it. NOTES To avoid the buzzer going off because of a low battery, please uncheck that option in the web interface. You can have the device ...